True Value Blog Squad Challange – A Bed Fit for a King! Part 1

So….we have been working on a new bed now for a while. When we took on the  DIY Blog Squad and the challenge to create new and exciting DIY projects, we committed to challenge ourselves – and we sure did with this one! The bed has been an exciting challenge to say the least! We started off looking to buy a bed, and couldn’t find exactly what we wanted. After much research and inspecting the hundreds of beds we went to look at, Joey announced “I can build this!”……and the mission began!

After drafting up some plans, we headed over to the True Value Lumber Yard in the Bronx and picked up some wood. It was a bit intimidating coming home with just a few pieces of wood and thinking we could whip it up into an actual bed. A bed we would sleep in that wouldn’t come crashing to the floor in the middle of the night!

You can see from the photos how intimidating this was! But we measured a thousand times, and were convinced we can make magic!. The first step we took was creating the bedframe. The actual piece which would hold the boxspring and mattress. All of the details we will walk through are that of a king size bed.

Here is what we did, how we did it and what it cost:

80″X83″ is the frame of the box spring: 2″X12″ (at about 8 feet long) wood is what we purchased 1 piece for the foot of the bed and 2 piece for the sides.

For stability of the boxspring we bought 2″X4″ at about 8 feet long to frame the inside of the 2″X12″ then laid the 1″X4″ over the 2″X”4 like this:

Even though this part is the part no one will see, it is super important to built this nice and sturdy! We used wood screws to attached everything with a drill. At this point make triangle supports – but do NOT attach them yet. Right now we are just laying out, measuring, and using screws to assemble to ensure perfection. Here is what you want to accomplish at this point:

The 2″X12″ wood will show when we are done, but not how you see it here. We decided to upholster the bed and headboard. At this point we are focusing on the stability of the bedframe. Is it secure?

So there you go! Step numbro uno! Now the wood looks like something! Next step is to buy the wood for the headboard. We purchased two 8ft X 4ft (3/4 inch thick) plywood. Now is a good time to pick out the fabric you are going to use to upholster the bed along with a nice thick foam and batting. Also pick up some spray glue and upholstery grade thread and needles.

So once again, your True Value Shopping list is:

2″X12″ wood X 3 at about 8 ft long (you will have to cut)

2″X4″ wood  X 3 at about 8 ft long (you won’t need all of it, you will have to cut to size of the 2″X12″)

1″X4″ wood bundle of 8 8 ft long (we didn’t use them all)

Wood Screws 1 Box of each:  2 1/2 in and 1 1/12 in

2 8ft X 4ft (3/4 inch thick) plywood

We also suggest: tape measurer, level, thick pencils and sharpies to mark wood

Lets get legal: We were one of the 10 bloggers True Value has chosen to work on The Blog Squad , and we are way excited to take on the challenge of showing you exciting DIY projects.  They have compensated us for our time and writing, and provided materials for the projects we have worked on. However, our opinions are entirely our own and we have not been paid to publish positive comments. Did we mention we are excited to show you our DIY Blog Squad Projects?

Related Posts Plugin for WordPress, Blogger...

Comments

  1. Hi, The bed looks good! What was the final cost?

  2. Joey and Lana Make a House a Home says:

    @ Margaret The whole bed ( wood, fabric, hardware) cost about $250 in wood, $50 in hardware, and about $100 in fabric. Not bad considering we were thinking about paying $ 3,000+!!! final post coming this week!

  3. Great job on the bed! I really appreciate this blog because like you, I built my own bed. I originally lofted my bed 5 feet off the ground so I could place my dresser and nightstand table underneath. The summer nights were getting too hot to sleep up that high. With a few adjustments I was able to lower it to 3.75 ft, just enough clearance for my furniture. I used these new wood screws from Qline and was surprised of how well they worked. I barley had to add any brackets to stabilize the bed.

    You saved money and can sleep on something you built. Isn’t it a great feeling?
    Thanks for sharing. Keep up the great work!

  4. There is certainly a great deal to find out about this
    issue. I really like all the points you made.
    More On this page recently posted..More On this pageMy Profile

  5. She was a clean cut Christian artist in Nashville
    named Katy Hudson just a few short years ago. Kearns landed an 18 inch rainbow, three
    20 inch bows and a 21 inch brown trout. it was at that place where
    she gained her epiphany – that the feeling of confusion in her is actually
    the feeling of love that she had for Abel.
    Rosie recently posted..RosieMy Profile

Speak Your Mind

*

CommentLuv badge